grechips.blogg.se - Ignition gateway utility

Navigate to Now go to Support > Support Portal > " Activate / Unactivate". This functionality is available through the Gateway Control Utility in versions of Igniton 7.5.7+Ģ) Click on "Create offline unactivation request" and save the unactivation_message.txt file.ģ) Take the un activation request file you obtained in step 1 to a computer the thas Internet access. Unactivating/Activating through the Gateway Control Utility See the videos here for the offline unactivation/ activation processes*

Trip unit Information: serial number, firmware revision.*Note: For versions 7.9+ the gateway looks a little different.

Trip unit alarms and status information.

Breaker position status (open or closed).

KW, 3-phase & total (+/- 5% accuracy for currents between 10% and 150% of the CT rating).

Review and change all settings (Must be enabled at trip unit).

Currents, 3-phase (+/- 2% accuracy for currents between 20% and 150% of the CT rating).

RS-485 Direct Connection (Modbus RTU) External RS-485-to-Ethernet Modbus Gateway Local Smart 1-Line + Remote Smart 1-LineĪC-PRO-II ® Communications Features and Information

The standard method for connecting trip units to the Smart 1-Line is a Direct RS-485 connection to Or via an Ethernet connection from a customer-supplied External RS-485-to-Ethernet Modbus The Smart 1-Line ® can communicate with the network of trip units using a direct RS-485 connection, Typical Communications Configuration Example Simply providing the new trip unit’s address to the HMIĪC-PRO-II ® trip units are compatible with the Modbus RTUĬommunication protocol supplied with most HMI systems Additional trip units can be added to the system by Information back to the host PC application. The driver continually interrogates each trip unit individually and reports that A number of trip units canīe daisy-chained together to simplify installation.Ī host PC running HMI software, such as our Smart 1-Line ®, with Modbus device driversĬollects information from the trip units. Modbus RTU protocol through a single shielded twisted pair The standardĪC-PRO-II ® trip unit communicates using industry standard

With Utility Relay Company’s AC-PRO-II ®. System for a low voltage power distribution system is easy We recommend using our Smart 1-Line ® HMI as your turn-key solution for monitoringĪC-PRO-II ® and AC-PRO ® networks at one convenient location.Ĭreating a complete power monitoring and communications Our trip units are capable of communication with any PC with HMI software and modbus drivers. Products > Communications Communications Setup